TW-300 HIGH SPEED HOLLOW POWER CHUCK
FEATURE
- No torsion of workpieces will be caused during machining because heavy duty holding knife made of light aluminium is applied to ensure high speed cutting and stable performance.
- Stable zigzag design work against high pressure and provide long tolerance and high accuracy at the same time.
- This type can be used for either hollow or closed center and the size of which depends on the connection part.
| DIMENSION MODEL |
Thru Hole mm |
Plunger Stroke mm |
Jaw Stroke(Diameter) mm | Max. Draw-Pull Force kgf |
Max. Gripping Force kgf |
Max. Speed R.P.M. |
Hydraulic Press kgf/cm2 |
Weight kg |
Matching Cylinder |
|---|---|---|---|---|---|---|---|---|---|
| TW-305 | 33 | 10 | 5.4 | 1750 | 3600 | 7000 | 29 | 7.5 | S1036 |
| TW-306 | 45 | 12 | 5.5 | 2200 | 5800 | 6000 | 28 | 13.5 | S1246 |
| TW-308 | 52 | 16 | 7.4 | 3400 | 8500 | 4800 | 26 | 24.5 | S1552 |
| TW-310 | 75 | 19 | 8.8 | 4300 | 11000 | 4200 | 27 | 37 | S1875 |
| TW-312 | 91 | 23 | 10.6 | 5500 | 14400 | 3000 | 27 | 65 | S2091 |
| DIMENSION MODEL |
A | B | C | D | E | F | G max |
G min |
H | J | K | L | M | N | P | Q max |
Q min |
R max |
R min |
S | T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TW-305 | 65 | 135 | 110 | 82.55 | 4 | 33 | 1 | -9 | 20 | 12 | M40*1.5 | 3-M10 | 26 | 54 | 14 | 26.5 | 23.8 | 19.5 | 6 | 1.5 | 23 |
| TW-306 | 81 | 169 | 140 | 104.78 | 5 | 45 | 11 | -1 | 19 | 20 | M55*2.0 | 6-M10 | 31 | 73 | 20 | 32 | 29.25 | 24 | 7.5 | 1.5 | 31 |
| TW-308 | 91 | 210 | 170 | 133.35 | 5 | 52 | 14.5 | -1.5 | 20.5 | 30 | M60*2.0 | 6-M12 | 37 | 95 | 25 | 38.7 | 35 | 30 | 10.5 | 1.5 | 35 |
| TW-310 | 100 | 254 | 220 | 171.45 | 5 | 75 | 8.5 | -10.5 | 25 | 45 | M85*2.0 | 6-M16 | 42 | 110 | 30 | 51 | 46.6 | 34.5 | 12 | 1.5 | 40 |
| TW-312 | 123 | 304 | 220 | 171.45 | 5 | 91 | 8 | -15 | 28 | 50 | M100*2.0 | 6-M16 | 48 | 129 | 30 | 61.3 | 56 | 46.5 | 12 | 1.5 | 48 |
| DIMENSION MODEL |
A | B | C | D | E | F | G | L | V |
|---|---|---|---|---|---|---|---|---|---|
| TW-306-A-05 | 81 | 169 | 140 | 82.557 | 15 | 5 | 116 | 14 | 3-M6 |
| TW-308-A-06 | 91 | 210 | 170 | 106.377 | 17 | 5 | 150 | 18 | 3-M6 |
| TW-310-A-08 | 100 | 254 | 220 | 139.722 | 18 | 5 | 171.45 | 25 | 3-M8 |
| TW-312-A-08 | 123 | 304 | 220 | 139.722 | 18 | 5 | 171.45 | 25 | 3-M8 |
